Taper thread on these fittings have a sealant applied for extra protection against leaks. Also known as JIC (Joint Industrial Council) fittings, they provide a tight metal-to-metal seal on tubing that is flared to 37°. They are excellent corrosion resistance. Fittings require a nut and a sleeve (ferrule) for each tube end. Nuts and sleeves are sold separately.
The taper thread BSPT (tapered) male will mate with a BSPT (tapered) female, or a BSPOR (parallel) female. The BSPT male has tapered threads. When mating with either the BSPT (tapered) female or the BSPOR (parallel) female port, the seal is made on the threads. The BSPT connector is similar to, but not interchangeable with, the NPTF connector. The thread pitch is different in most cases, and the thread angle is 55° instead of the 60° angle found on NPTF threads.
PART NO. | THREAD | DIMENSIONS | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
E | F | A | B | L | S1 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-04-02SP | 7/16"X20 | R1/8"X28 | 14 | 10 | 30 | 12 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-04SP | 7/16"X20 | R1/4"X19 | 14 | 14.5 | 34.5 | 14 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-04-06SP | 7/16"X20 | R3/8"X19 | 14 | 15 | 35 | 17 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-05-02SP | 1/2"X20 | R1/8"X28 | 14 | 10.5 | 30.5 | 14 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-05-04SP | 1/2"X20 | R1/4"X19 | 14 | 14.5 | 34 | 14 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-05-06SP | 1/2"X20 | R3/8"X19 | 14 | 15 | 35 | 19 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-06-02SP | 9/16"X18 | R1/8"X28 | 14.1 | 10.5 | 30.5 | 17 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-06-04SP | 9/16"X18 | R1/4"X19 | 14.1 | 14.5 | 34 | 17 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-06SP | 9/16"X18 | R3/8"X19 | 14.1 | 15 | 34 | 17 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-06-08SP | 9/16"X18 | R1/2"X14 | 14.1 | 20 | 41 | 22 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-08-06SP | 3/4"X16 | R3/8"X19 | 16.7 | 15 | 39 | 22 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-08SP | 3/4"X16 | R1/2"X14 | 16.7 | 20 | 44.5 | 22 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-08-12SP | 3/4"X16 | R3/4"X14 | 16.7 | 20 | 46 | 30 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-10-06SP | 7/8"X14 | R3/8"X19 | 19.3 | 15 | 42.5 | 24 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-10-08SP | 7/8"X14 | R1/2"X14 | 19.3 | 20 | 46.5 | 24 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-10-12SP | 7/8"X14 | R3/4"X14 | 19.3 | 20 | 48.5 | 30 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-12-08SP | 1.1/16"X12 | R1/2"X14 | 21.9 | 20 | 51 | 30 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-12SP | 1.1/16"X12 | R3/4"X14 | 21.9 | 20 | 51 | 30 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-12-16SP | 1.1/16"X12 | R1"X11 | 21.9 | 25.5 | 57.5 | 36 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-14-12SP | 1.3/16"X12 | R3/4"X14 | 22.6 | 20 | 52.5 | 32 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-14-16SP | 1.3/16"X12 | R1"X11 | 22.6 | 25.5 | 57.5 | 36 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-16-12SP | 1.5/16"X12 | R3/4"X14 | 23.1 | 20 | 53 | 36 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-16SP | 1.5/16"X12 | R1"X11 | 23.1 | 25.5 | 59 | 36 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-16-20SP | 1.5/16"X12 | R1.1/4"X11 | 23.1 | 26.5 | 61.5 | 46 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-20-16SP | 1.5/8"X12 | R1"X11 | 24.3 | 25.5 | 62.5 | 46 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-20SP | 1.5/8"X12 | R1.1/4"X11 | 24.3 | 26.5 | 63 | 46 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-20-24SP | 1.5/8"X12 | R1.1/2"X11 | 24.3 | 26.5 | 66.5 | 50 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-24-20SP | 1.7/8"X12 | R1.1/4"X11 | 27.5 | 26.5 | 67.5 | 50 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-24SP | 1.7/8"X12 | R1.1/2"X11 | 27.5 | 26.5 | 69.5 | 50 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-24-32SP | 1.7/8"X12 | R2"X11 | 27.5 | 30 | 74.5 | 65 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-32-24SP | 2.1/2"X12 | R1.1/2"X11 | 33.9 | 26.5 | 77.5 | 65 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
1JT-32SP | 2.1/2"X12 | R2"X11 | 33.9 | 30 | 80 | 65 |
Note:Nut and sleeve should be ordered speparately.The nut NB200 and sleeve NB500 is suitable for metric tube,the nut NB200 and sleeve NB300 is suitable for inch tube.
High quality hydraulic fitting can satisfy your different needs with its special quality and features.
1.high quality Zinc plated,Zn-Ni plated,Cr3,Cr6 plated.
2.high precision.all edges without burrs,brake sharp edges.
3.competitive price.
4. MOQ:300PCS
5. Material: iron, carbon steel, stainless steel, other metals
6.Standard / specification: Standard or as per drawing and samples (OEM)
7. Size: as per customers' requests
Customized service: We are specialized in all kinds of hydraulic hose fittings,adaptors,ferrules,flanges,fitting accessories.
1. Delivery:As general,we can guarantee the delivery within one month.
2. Port of loading: Ningbo or Shanghai
3. Samples Fee: We can offord the samples fee.