Quick change joints can be divided into two categories: with check valve and without check valve. The principle of the one-way valve connector is: the one-way valve end is connected with the air source, the one-way valve is automatically closed when disconnected, and the ejector rod at the movable end opens the one-way valve when connected. Self-locking means that the steel ball is embedded in the groove, and the steel ball is locked by the "cone-cylindrical" sleeve.
2. Hydraulic joints.
In fact, it is a hydraulic pipe joint, which is used to connect the components between the high-pressure oil pipe and the high-pressure oil pipe in the hydraulic system. Various joints required for hydraulic or pneumatic management connections of various fluid power components are
hydraulic joints, which are mainly used to connect pipelines to hydraulic systems and have the function of sealing bearing interfaces to prevent leakage.
3. Hydraulic joints
Fittings are connectors used to connect fluid power system components. . From a structural point of view, in addition to the plug and cap, there must be at least two ports. The swaged fittings that connect to the system components are the port ends, and the pipe ends connect to the ends of the hose nipples.
4. Hydraulic fittings, what types are there?
Hydraulic pipe joints can be divided into hydraulic hoses, high pressure ball valves, quick connectors, ferrule pipe joints, welded pipe joints, high pressure hoses, transition pipe joints, tee pipe joints, non-standard pipe joints, flared pipe joints, right angle Tube fittings, swivel fittings, quick connectors, stainless steel fittings and copper fittings.
