Types of Hose Fitting connect conductors include: integrated hose connectors, crimped hose connectors, internal locking hose connectors, detachable hose connectors, etc. The integrated hose joint is a high-quality flexible pipe in modern industrial pipelines. It mainly consists of corrugated pipes, mesh sleeves and joints. Hose joints are mainly used in gas transmission and distribution systems and gas pressure regulating stations. Their function is to insulate and isolate each section of the gas transmission and distribution pipeline, the gas pressure regulating station and the transmission and distribution pipelines, and protect them from electrochemical corrosion. Extended service life.
Hose joint installation method
1. Use a screwdriver to loosen the screws on the outside of the connector;
2. Insert the faucet into the hose connector and tighten the screw so that the screw holds against the faucet;
3. Rotate the second half of the hose connector to tighten the connector and the faucet outlet;
4. Connect the hose and open the faucet, and that’s it.
Precautions for installing Hose Fitting connect conductors
1. Before using acidic detergent to clean the pipes, it is necessary to clean away the remaining welding slag, stains, varnish and other substances to avoid chemical reactions that may cause unnecessary damage to the pipes and affect future use.
2. In order to ensure the normal use of hose joints, special protection is required. Whether during transportation, disassembly, or pickling, it is most likely not to damage the threads, pipes, and sealing surfaces. The best way is to use tape for sealing.
3. Do not play with the threads of the hose joint, and use acid-resistant plastic or rubber tapes for protection. Or after washing with water, apply dry oil to the threads first, then put them into acid solution to remove rust spots after drying.
4. During the process of cleaning the pipes, special attention should be paid to the markings on the pipes and the integrity of the markings should be protected as much as possible. Moreover, before using pickling, it is necessary to complete all the welding tasks. At the same time, in daily life, you also need to pay attention to the necessary protection of the hose.
