Industry News

Method of Use of Electric Hydraulic Oil Pump:

2021-08-03
Method of use of electric hydraulic oil pump:
When the electric hydraulic oil pump is used, the deflation nut should be opened, open the switch on the press, insert the power supply, and set the quick connector to the fast head applied to the hydraulic instrument. Press the power switch, to rotate for 1-2 minutes in the motor, turn off the switch to the supercharged state, then output the hydraulic oil will work in various work, output hydraulic oil with the increase of the load and pressurize the various work until 63MPa .
After the work is over, turn on the switch to unload, after the oil pressure oil return oil is completed, remove the quick joint cover, spin the air nut, pull the electric na, and close the switch.